Select Page

Last Updated on

Share And Help!

Plexiglass is an affordable and long-lasting material you may use to get various assignments. Like photo frames, table-tops, or like a shatterproof replacement such as the glass.

It’s lightweight, cheap, plus it continues for quite a while as it can not rust or crack. You may also readily reduce it into shape with all the most suitable instruments, the appropriate safety measures, and even adjust dimensions.

You Might Need These Products To Do The Job Be Done.

Hyde Tools 45730 Plastic Cutting Tool
This Product Is A Paint Rollers; Plastic Hand Grip; Super Sharp Steel Blade; Brand Name: Hyde Tools
SKIL 5280-01 15-Amp 7-1/4-Inch Circular Saw with Single Beam...
Powerful 15-amp motor delivers 5,300-RPM for greater speed and faster cuts; 7-1/4-in carbide-tipped blade included. Spindle lock for easy blade changes.
BLACK+DECKER BDEJS600C Smart Select Jig Saw, 5.0-Amp
5 Amp variable-speed motor; up to 3,000 SPM of cutting power; Can make 45 degree bevel cuts; with adjustable shoe for stability

Lean sheets might be snapped and scored using a utility knife or grading instrument.

Thicker layers need to get trimmed with a round found for direct a ribbon to decrease shapes from this sheet.

Snapping Thin Plexiglass

1. Snapping Thin Plexiglass: For thin sheets of plexiglass which are around 3⁄16 inch (0.48 cm) thick, then scoring the sheet and then ripping it’s a simple method to reduce back it.

Set the sheet flat onto a desk or some workout channel therefore that you may quantify and minimize a surface.

  • Guarantee the top is bright and clean of any items which will disturb work or possibly markers or damage that the sheet.
  • Utilize an and secure arrangement that will not budge.

2. Pull-on a lineup having a dry-erase mark exactly where you would like to decrease the plank. Using all the sheets placed horizontally onto the job surface area.

Make use of a ruler for helpful tips and attract on a direct line wherever you would like to decrease sheet.

Create the lineup observable and also be cautious to not smudge the mark.

  • Utilize a dry-erase mark, and that means that you may disable it once you slice on the sheet.

Hint: Should you make an error during the time that you are pulling on the line.

Then divert the markers fully therefore that you may draw on it. Make use of a moist cloth or paper towel to eliminate the tags.

3. Utilize a utility knife to decrease over the line you’ve indicated around the plank. Be sure that the sheet is both stable and flat to the top layer.

Implement firm pressure and make use of a ruler. To direct your utility knife since you haul it around the line you’ve indicated to evaluate precisely the sheet of plexiglass.

Operate the blade within the front 10 or 12 times, and soon you have left a heavy groove at the layer.

  • You can use a scoring tool to cut the plexiglass. Provided that the blade is sharp enough.
  • If you make a deeper cut, you can easily break the glass.

Snapping Thin Plexiglass

buy button

4. Twist the sheet and examine one other hand once you have shaped a deep groove at 1 of this plexiglass.

Then catch the layer on both sides and then turn it on to expose the opposite hand by side Cut over an identical line.

Which you cut about the opposite hand to additional measure the sheet assessing the plexiglass till you have shaped a groove at this sheet.

  • Mind it, lift the sheet carefully. Because of lifting the sheet can make the glass break before you make it.

5. Placement the sheet accordingly that you just cut is dangling across the border.

When you have completed scoring the sheet, then proceed it in a location that’ll ensure it is much easier than you snap off it.

Proceed with the layer. The percentage that you want to catch is hanging across the border.

  • Make certain the full portion which you intend to interrupt is dangling across the edge of this surface.

How to cut plexiglass

buy button

6. Clamp the sheet place into your outer lining. Make use of a spring or a c-clamp and then employ this to part of the sheet you never wish to cut on back.

Please put on the clamp, therefore, that it’s attached with the layer of plexiglass. Along with the outside that you just are focusing on. Thus that the sheet will not maneuver.

  • Take care to not twist the clamp therefore it places out a dent or divot from the sheet.

7. Stripped off the Trim Section of the Plexi Glass.

Together with all the sheets of plexiglass clamped set up in the job surface area. Employ quick and downward stress to crack the slice that you cut on-off.

The layer needs to split along across the point you scored init.

How to Cut Plexiglass by Hand.

Plexiglas can be fresh of aluminum-plastic sheets, and that can be constructed from rather thick vinyl and therefore are frequently substituted for glass.

It truly is apparent. For example, glass but will not crack as quickly as glass.

But, Plexiglas does scratch very efficiently, therefore it needs to be managed and also trimmed together with care. Plexiglas can be employed professionally and for crafts.

How to Cut Plexiglass by Hand

Image Credit: Instructables

buy button

Plexiglas can be sold in the paper. Maintain the newspaper for as long as possible so that the Plexiglas won’t have scraped.

Practice the directions under to lower thin sheets of plexiglass along lines.

  • Set the Plexiglas onto a Level surface.
  • Mark that the Plexiglas is having a grease pen exactly where you wish to cut on at it.
  • You might need to utilize a ruler or tape measure to be sure that your lines are direct.
  • Together with the lines you’ve indicated attentively measure the Plexiglas 5 to ten times having a glasscutter.
  • Transfer the felt section into the border of this surface.
  • Employ a sharp downward punch over the Plexiglas to interrupt down it together with the line.

In the event, you would like to minimize more complex contours or thicker sheets of Plexiglas. Then you’ve got to utilize tools.

In shape, your electricity found using a blade constructed for cutting oil or using a sword created for reducing aluminum or aluminum.

That the blade teeth need to be OK, the same elevation and also equally spaced. Only adhere to steps two and one above, after which cut on the Plexiglas together with the ability noticed.

So now you know how to cut plexiglass in a proper way. But you minimize your Plexiglas.

The borders will probably have to be more emptied once they are trimmed off. That is efficiently completed with an electrical noticed.


To get a thin sheet of plexiglass. Which is up material to approximately 3/16-inch thick work with a more scoring procedure not as dissimilar from an approach utilized to lower actual glass.

  • Lay the sheet onto a level working surface as well as with a yardstick.
  • As well as also a permanent mark (or some dirt mark )measure and attract on the lineup you prefer to lower off.
  • Next, then contain on the yardstick into the marked line. And then also run on the muted aspect of the utility knife combined the pattern to measure precisely the sheet.
  • Score over and over, as much as 10 or even 12 times. And soon you’ve left a deep groove at the plexiglass.
  • Switch within the Plexiglass and dent the exact other hands at an Identical Method.
  • To complete, grip the scribed point into the border of the work surface.
  • And then fasten the plexiglass instead of a bolt.
  • Subsequently, using sharp down tension and snap the section of the plexiglass that goes over and above the job surface area.


For thicker sheets of plexiglass, cut using an electrical found. Make it a circular saw, saber saw, or table saw.

(To trim out anything but a direct line, decide on a decoration).

Whichever viewed you select for that job. It truly is seriously essential to utilize the most suitable blade.

You’ll find exclusive modules developed, especially for oil.

However, no metal cutting blade, together with carbide hints, may work. Before investing a knife or some other, double which the teeth are somewhat equally dispersed.

Without no-rake, and also of course uniform elevation and contour.

Right after reading the software, mark and measure your plexiglass. Subsequently trim because you’d any extra stuff, clamping when ideal.

One note of warning: When the blade accomplishes, then the cloth can crack or chip.

Proceed consequently, water cooling the edge or restarting work with a couple of seconds when essential.


Whichever chopping procedure you select, you can discover the trimming border will not look incredibly desirable.

In case the reduce border could be observable on your app, have some additional period to buff and sand the imperfections out.

Be aware: You also can work with a handheld electricity sander. However handbook wet-sanding an average of accomplishes the very results.

  1. Begin the course of action with 120 or 180 grit watertight sandpaper. In conjunction with using timber or plastic sheeting block.
  2. Since the plexiglass gets smoother, a changeover into successively finer grits. End by trimming with 600 grit paper.
  3. As soon as you’re pleased with all the look of this border, proceed ahead to buffing. Outfit your electrical drill having a buffing pad and.
  4. Even after employing a sharpening chemical formulated for vinyl, draw the plexiglass border to some ideal gloss.

Every construction material has a group of quirks and nuances you may grasp with exercise.

Luckily it will not take very long to get Do it yourself with woodworking encounter to understand to trim plexiglass.

Even though for some moment, you might have to cut on the part of oil right down to dimension.

Following how to assist this particular elastic, translucent cloth opens into a new world of doing it yourself chances you may research in bulk endeavors for many decades.

Cutting Linear Lines with a Circular Saw.

Grab the best circular saw for your project. This one is our choice. Do You Want to know more about this circular saw? See Reviews. 

SKIL 5280-01 15-Amp 7-1/4-Inch Circular Saw with Single Beam...
1,764 Reviews
SKIL 5280-01 15-Amp 7-1/4-Inch Circular Saw with Single Beam...
  • Powerful 15-amp motor delivers 5,300-RPM for greater speed and faster cuts
  • 7-1/4-in carbide-tipped blade included. Spindle lock for easy blade changes.
  • 51? bevel capacity for a wide variety of cuts. Arbor size: 5/8 inches, cord length: 6 feet
  • Lightweight 6.95-lb design reduces fatigue
  • Dust blower keeps line-of-cut free of sawdust for improved visibility.Anti-snag lower guard reduces snags when making narrow cut-offs

1. Utilize a round noticed having a carbide tipped metal cutting blade. Thicker sheets of plexiglass need to get trimmed using a saw.

Ensure that the teeth of this blade will be equally spaced and also the identical dimensions and contour to get the additional reduction.

  • Even a carbide-tipped blade that is intended for slicing alloy is sufficiently powerful to slice on the sheet with no debris or dust flying into the atmosphere.
  • The more significant amount of teeth to your blade may lessen the sum of debris or dust which trimming on the plexiglass will generate.
  • You will find blades mainly intended for cutting edge plexiglass you may use too.

Caution: Little particles of plexiglass can harm your own eyes. Put on eye protection once you slice sheet.

2. Place the sheet back over a Saw Horse mark wherever you would like to cut on back. Set the sheet of plexiglass onto a Saw-Horse.

Therefore that you may cut throughout the layer while preserving it secure and flat.

Work with a straightedge or perhaps a ruler to indicate a direct line onto the sheet of plexiglass.

  • This line is going to function as the cutting edge guide accordingly to make sure that it’s visible and straight.
  • Make use of a dry-erase mark, and that means it is easy to eliminate the target if you ought to create alterations.

3. Align the cutting edge direct on this watch with all the lineup you’ve declared. The round observed is going to possess a viewer along with perhaps a slot machine.

This enables one to observe where in fact the watched is lined upward.

Place this specific guide in accord together with the indicating which you placed onto the sheet of plexiglass.

  • Guarantee the sheet is more stable and will not shake or proceed.

4. Bring the saw into the full speed before putting on the sheet.

The blade of the observed has to have been tilted at a total rate until it gets a connection with all the layers. To generate a clean and cut on.
Turn onto the found and enable it to rotate until finally, it has to its entire rate.

5. Drive the saw gently and efficiently throughout the plexiglass sheet. Utilize the cutting edge direct and also the right line to direct the watched through this sheet.

Drive the noticed in a stable and reliable tempo to keep the found.

  • In the event the saw is either stuttering or grabbing, you may well be pushing the watched overly rapid.
  • Quit pushing to permit the blade to get up to rate and subsequently keep to drive on the knife throughout this sheet.
  • Make individual the two halves are all balanced over your saw-horse so that they don’t fall into the earth whenever you end reducing the sheet.

Using a Jigsaw to Cut A Shapes in Plexiglass.

Grab the best Jigsaw for your project. This one is our choice. Do You Want to know more about this jigsaw? See Reviews. 

BLACK+DECKER BDEJS600C Smart Select Jig Saw, 5.0-Amp
  • Curve Control technology which allows you to adjust the saw's orbit in 1 of 4 customized settings
  • 5 Amp variable-speed motor; up to 3,000 SPM of cutting power
  • Can make 45 degree bevel cuts; with adjustable shoe for stability
  • New and improved Wire Guard
  • Dust blower

1. Utilize a jigsaw to create curved cuts from the plexiglass. A decoration seems much like a band-saw. However, it truly is cuts and shorter at an up-and-down motion.

You can make use of a ribbon to create wounds in addition to curved cuts.

Therefore that it’s a fantastic choice should you have to lower on a particular form or some circular bit from the sheet of plexiglass?

  • Utilize an uncoated blade with the beautiful tooth to decrease plexiglass.
  • Maintain a couple of additional blades near if you want to displace it if you are cutting off.

2. Set the sheet of plexiglass level to the sawhorse. Please make use of a Saw Horse for a workout channel to grip the sheet once you minimize it.

Bend the sheet so that it’s stable and secure around the Saw-Horse.

  • Verify to guarantee that the cloth will not slip or sew until you reduce it.

3. Mark the sheet has a dry-erase mark to direct the decoration. You must have a complete manual to check out in case you are employing an honor.

Especially in the event, the contour you’re reducing is irregular or round.

A ribbon gives you the ability to make a more certain contour. Nevertheless, you have to get an excellent suitable indicating touse since a manual.

Make use of a dry-erase mark to generate the outline of this contour you intend to lower back.

  • A dry-erase mark causes it to be much easier than you eliminate the markers whenever you are accomplished or if you will need to shift it.

Hint: When you are putting on a layout or contour, work with a stencil or some rounded thing that will help indicate a line.

4. Apply safety glasses to secure your own eyes. Sawing a sheet of plexiglass can induce splinters and also small particles to fly in the atmosphere.

These can hurt your own eyes should they buy inside them. Just before you start pruning, place onto a couple of glasses.

  • Please make sure the eyeglasses match snugly onto your mind so that they don’t drop off as you are stirring!

5. Drill a hole to suit the decoration into the sheet. The Twist will require an opening to insert in the plexiglass sheet.

So, therefore, start with drilling a hole using a drill and masonry piece big enough to earn a gap in which the blade will probably match.

  • In the event, you want to decrease contour with spins and turns.
  • Then drill holes throughout the sheet in the ancient corners of this silhouette.
  • This may assist the jigsaw blade in twisting the moment it extends to all those endings.
  • In the event, the blade of this decoration is unable enough to shoot the works readily. It might flex the sword or split it.

6. Add the blade into the pit and then draw on the blade into a full rate. Blend the blade of this ribbon into the pit that you left from the sheet and then turn it all on.

A jigsaw blade goes lower compared to the usual ring saw, or a circular observed.

Therefore it has to be attracted to full rate just before you get started deploying it to trim off.

  • In the event, the blade is not at the full rate the moment it gets a connection with all a plexiglass.
  • It might capture and bend or break and damage their own jigsaw.
  • Potentially, the blade can injure and snap one personally, therefore utilize warning.

7. Drive the decoration slowly and gradually to trim throughout the sheet. Employ steady strain keep the honor from leaping away from this sheet.

Practice the manual markers slow and carefully to shoot some flips.

In the event, you listen to or believe that the blade grabbing or slow down.

And then down to permit the blade to secure up to date then keep to drive on the saw throughout the plexiglass.

Different types of tile cutters.

FAQ About Plexiglass.

Share And Help!