O’skool 18 Inch Miter Gauge Fence system

Kreg KMS7102 Table Saw Precision Miter Gauge System

$159.99
Too low to display  in stock
14 new
1 used from $125.39
Free shipping
Buy Now
Amazon.com
as of November 14, 2019 11:40 pm

Features

  • Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
  • Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
  • Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate "play" in the miter slot with the turn of a screwdriver
  • Microadjuster allows additional angle adjustment to 1/100th degree
  • Positive stops at 0, 10, 22-1/2, 30 and 45-degrees; limited lifetime warranty

Precision Miter Gauge with a Standard Slot (3/4" x 3/8") Steel Bar Equipped with Adjustable Spring Loaded Plungers and Removable Retaining Disc

$49.99  in stock
2 new from $49.99
2 used from $45.98
Free shipping
Buy Now
Amazon.com
as of November 14, 2019 11:40 pm

Features

  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
  • The .200" thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼" x ½" slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8" from the base of the miter gauge head.
  • The head is mounted to a solid steel miter bar that measure 18" in length and is .353" thick by .730" wide. Standard miter slots (not Craftsman or Sears branded items) are 3/4" x 3/8" with a 1/8" "T" slot (with slight variances from brand to brand) running the length on the bottom of the slot.
  • The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8" in diameter and is just shy of 1/8" to fit into to the "T" slot to prevent accidental lifting when feeding your stock through. If your saw does not have a "T" slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.

O'skool 18 Inch Miter Gauge Fence system

$79.99  in stock
1 new from $79.99
Free shipping
Buy Now
Amazon.com
as of November 14, 2019 11:40 pm

Features

  • Designed to be universal, it will fit most bench tools with any standard 3/4" x 3/8" track with a 1/8" "T" slot . The slide bar has a locking washer fit into to the "T" slot to prevent accidental lifting when feeding your stock through,If your saw does not have a "T" slot, you can remove the locking washer.
  • 18" long aluminium fence complete with flip-up length stop.
  • The steel miter bar is equipped four sprung loaded ball bearings on the side of the bar ,the sprung loaded ball bearings ,the bearings can be adjusted with the provide hex key wrench in or out to keep the bar snug in the track.
  • Ideal for cross-cutting wood at a specific angle, zeroed at a 90 degree, it allows the wood to be cut at any angle between 0 and 90 degrees(0°, 22.5°, 30°, 45°, 60°, 67.5°, 90°).
  • Improve safety and accuracy on the table saw and the router table.

POWERTEC 71005 Deluxe Table Saw Miter Gauge

$37.79
$36.66  in stock
3 new from $36.66
5 used from $32.91
Free shipping
Buy Now
Amazon.com
as of November 14, 2019 11:40 pm

Features

  • Made for professional use
  • To fit 3/8 x 3/4 inch slot
  • Positive Stops at all common angles
  • Large grip for comfort and strength
  • Tip resistant washer to keep gauge steady when extended over work surface

Sharing is caring!

Sharing is caring!

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top